Original Abatement TechonologiesPAS1600SHS High Static HEPA-Aire Portable Air Scrubber (1900cfm)

Abatement TechonologiesPAS1600SHS High Static HEPA-Aire Portable Air Scrubber (1900cfm)

HEPA-AIRE® PAS1600SHS Portable HEPA-Filtration Systems Contain Hazardous Airborne Particles Released During Water Restoration and Mold Remediation Projects

• Rugged & Easy to Clean Stainless Steel Cabinet
• Standard 3-Stage Particle Filtration
• Optional High Capacity Carbon Filter Available
• High Performance 99.97%+ True HEPA Filter
• Lightweight 24”x24”x6” Plastic HEPA Frame Reduces Weight
• Rear 12” Wheels With Solid Non-Marking Rubber Tires
• Front 360° Swivel Casters Enhance Maneuverability
• NRTL Certified to Comply with UL Std 507 & CAN/CSA No 113-M1984 for Electrical Safety

The PAS1600SHS Portable Air Scrubber from Abatement Technologies® delivers more bang for your buck compared to other negative air filtration devices. The PAS1600SHS has the features you are looking for such as powerful airflow, low amperage draw, a lightweight and mobile design–all at an affordable price! Plus, the PAS1600SHS Portable Air Scrubber comes with the unmatched quality and reliability you expect from Abatement Technologies, the industry leader for high performance HEPA-filtration systems.

The PAS1600SHS Portable HEPA-Filtration System is equipped for creating negative pressure containment or use as a recirculating air scrubber. The unit captures particles in three or four filter stages with exceptional dirt holding capacity, including a final-stage HEPA filter tested and certified to capture at least 99.97% @ 0.3-micron particles. The PAS1600SHS operates safely with power to spare on a 120 V/15 amp electric circuit.

Filter stages include:

• Stage 1 – Inexpensive 1” FIBER-TRAPPER® 1.0 pre-filter
• Stage 2 – 2” pleated particulate pre-filter
• Stage 3 (optional) – 2” high-capacity VAPOR-LOCK® carbon filter for odors (not included)
• Standard 6”-deep HEPA filter – Tested and certified to 99.97% minimum efficiency @ 0.3 microns
• More Power for Your Toughest Structural Drying Jobs

The HEPA-AIRE PAS1600SHS provides the enhanced performance required for the toughest structural drying jobs, such as use with specialized drying attachments. A powerful 1.5 hp motor and back­ward curved blower that produce up to 50% more static capacity than competitive units dry structures faster, can increase productivity, and reduce drying time and costs. At peak airflow of 1,900 cfm, the PAS1600SHS can typically maintain 6 ACH in containment areas as large as 19,000 ft³. Versatility and Performance Designed to Handle Your Toughest Water Restoration Jobs.

The PAS1600SHS model is equipped with many outstanding design innovations such as:

• Portability – Upright, single-module design with built-in transport dolly rolls easily on 12” diameter smooth, non-marking rear wheels
• Ruggedness – Stainless steel cabinet is attractive and easy to clean
• Efficiency – True, high-performance 99.97%-certified HEPA filter retains its original 99.97%+ efficiency even after hundreds of hours of operation
• User-Friendly Controls – Recessed control panel for easy monitoring and control of the unit
• Safety First – NRTL Certified to conform to UL507 and CSA 22.2 safety standards
• Powerful Airflow – Creates high static pressure required for operating high-resistance drying attachments such as the Adaptidry Ceiling, Wall & Floor Drying System

HEPA-AIRE PAS1600SHS Portable HEPA-Filtration System Specifications

• Airflow* – 1,900 cfm
• Air Changes Per Hour – 6 ACH @ 19,000 ft³
• Maximum Blower Static Pressure – 4.7” water gauge
• Net Weight with Filters – 131 pounds
• Shipping Weight – 153 pounds
• Dimensions (L x W x H) – 24.75”L x 27.5”W x 38.625”H
• Power Supply Requirements – 120 volts AC, 60Hz, 15 amps
• Peak Operating Amps – 8 amps
• Electrical Safety – NRTL-certified to comply with UL Std. 507 & CAN/CSA Std. #C22.2 No. 113-M1984 for electrical safety
• Motor/Blower – 1.5 HP high-efficiency/backward curved
• Controls – Protected recessed controls, Off/High/Low speed selector switch, power indicator lamp, separate ‘Replace Pre-filter’ and ‘replace HEPA’ lamps, digital operating hour meter
• Differential Filter Pressure Gauge – 5” diameter differential pressure gauge
• Cabinet Material – 20 gauge stainless steel construction with solid rivets
• Built-in Dolly – Two-wheel dolly with 12” solid, non-marking rubber rear wheels, 360° swivel front casters and a secure top handle for easy movement and control
• Easy to Replace Pre-Filters – Hinged and latched pre-filter access door with a full perimeter gasket seal to protect against dirty-air bypass
• Pre-Filter Mounting – Separate slide-in compartments for up to 3 pre-filter stages
• Inlet/Outlet Manifold – 12” inlet/outlet collar designed for attachment of flex duct, lay-flat duct (outlet only), or high static tools

*Airflow ratings are based on third party testing conducted @ 120 VAC with clean filters in accordance with generally accepted testing methods using highly accurate electronic flow measurement equipment. Different testing methods may produce higher or lower results. Ratings have been rounded off for convenience.